News

Precautions for installing solid tires

Pneumatic tires are now widely used in tire types, and tires corresponding to pneumatic tires - solid tires are now being used more and more, compared with pneumatic tires more tires more wear resistance.


Solid tires are mainly used for low-speed heavy-duty lifting vehicles, traction vehicles and flatbed vehicles and other industrial vehicles, and solid tires are also widely used in all walks of life, such as military, construction machinery and other fields. These are solid tires of some simple introduction, I think we must have some understanding, but for the solid tire installation problems, we all solution? Here to explain some of the solid tire installation considerations.

Precautions for solid tire installation:

First of all, the need for tire and rim fit to check, it should be noted that with the specifications of the tires used by the width of the rim is different, this is very important to use, so to confirm. And when checking the rim, pay attention to check whether the rim is defective, whether there is no burr.


Secondly, when the solid tire is installed, it is necessary to spray and apply the lubricant to the outer surface of the tire hub and the rim. This can reduce the friction between the rim and the tire, and make sure that the tire is installed in place. And other industries commonly used lubricants, once used, it will swell rubber, damage the tires.


Finally, to tell you that the tire to the rim when placed flat, do not skew, otherwise it will make the installation into difficulties, there must be installed in place in the rim, while the bolts tight, or easy Slip or tire rims are dangerous. In addition, according to the ETRTOEDI standard requirements, the tire must be concentric when loaded into the car. Different specifications manufacturers and wear different tires can not be installed on the same car or the same axis, not with the inflatable tire mixed, or easy to cause personal, equipment accidents.